HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  

Add on modules for Nanonis Tramea

A series of hardware and software add-on modules is offered to extend the functionality of the Nanonis Tramea™ base configuration. Add new capabilities and optimize your measurement system to meet your individual needs. For example, one or two additional TSC increase the number of input and output channels to 16 and 24 resp.

Contact us if you have any requirement for specialized measurement modules, we are happy to discuss and find a solution with you.

  Nanonis Tramea TSC Additional Signal Conversion unit for more outputs and inputs

  • Adds 8 analog outputs and 8 analog inputs
  • Extend your measurement system to 16 or even 24 I/Os
  • Seamless integration with the Tramea™ software
  • Up to 2 TSCs can be added to the Tramea™ base configuration
        more »

  Nanonis Tramea TSO Additional Signal Output unit for more outputs

  • Adds 16 analog outputs
  • Extend your measurement system to 24, 32, 40 or even 48 outputs
  • Seamless integration with the Tramea™ software
  • Up to 2 TSOs can be added to the Tramea™ base configuration
       more »

  Nanonis Tramea Lock-in modules

  • Modulates any signal up to 40kHz
  • Demodulates any signal up to 100 kHz (r, phi and X, Y)
  • Up to 8 independent lock-ins
  • Up to 8 independent demodulators
  • Advanced signal filtering
  • Record transfer functions (bode plots)
        more »

  Nanonis Tramea High-resolution oscilloscope and spectrum analyzer

  • Acquire time-resolved data with up to 1 MS/s and 1 million points
  • High input resolution (18-bit)
  • Oversampling of up to 1024x for long-term measurements
  • 500’000-point FFT
  • Pre-triggering and continuous data saving

       more »

  Nanonis Tramea LabVIEW Programming Interface

  • Develop and automate new experiments in LabVIEW
  • Programmatically control all Nanonis Tramea™ modules
  • Easily integrate external instruments
  • Many examples ready for use
       more »

  Nanonis Tramea Scripting Module

  • Script your own measurement sequences on the real-time system
  • Real-time execution of scripts for high-speed execution
  • Fully customizable data acquisition
  • FOR-loops, IF-conditions
  • 20 kHz loop-rate
  • Integration with the Programming Interface
       more »

  Nanonis Tramea Function Generator

  • Generate any custom periodic waveform with a frequency of 0.5 Hz to 15 kHz
  • Single-shot operation possible
  • High resolution of generated signal (20-bit)
  • 2 synchronized output channels
       more »

  Nanonis Tramea Generic PI controller

  • Feedback on any signal
  • Response to  any output
  • DC and AC mode
        more »


Back  |   Print Page

nanonis   News & Events
Nanonis SO5/TSO 16-channel signal source released

The SO5 and TSO are 16-channel precision, low-noise analog output add on modules for the Nanonis SPM Control System and the Nanonis Tramea quantum transport measurement system. Nanonis Tramea users can profit from up to 48 temperature-stabilized 20-bit signal sources able to control even the most complex nanostructures. More information about the new instrument can be found here

New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26

        Privacy Policy

© 2020 by Nanonis Powered by MySign