HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  

Adaptation Kit for Omicron SPMs

The Adaptation Kit for Omicron microscopes (AK-OM4) interfaces the Nanonis Controller with most types of Omicron microscopes. The original microscope cables connect directly to the pin-compatible interface, which makes it extremely simple to connect the control system to the microscope. The adaptation kit powers both STM and AFM pre-amplifiers and switches current and bias gains. In the case of beam deflection AFM models, the laser diode is monitored directly by the Nanonis software and the beam-deflection module displays the signals from the photo-detector. Control of inertial motors (x, y, z, mirrors and PSD) for coarse motion as well as automatic approach is seamlessly integrated in the Nanonis software and requires the Nanonis Piezo Motor Driver (PMD4).

Additionally, with the Nanonis OC4 add-on module, any dynamic AFM modes are available for all AFM models with either a regular cantilever, a qPlus sensor or a Needle Sensor.

  Recommended optional modules


Back  |   Print Page

nanonis   News & Events
Nanonis SO5/TSO 16-channel signal source released

The SO5 and TSO are 16-channel precision, low-noise analog output add on modules for the Nanonis SPM Control System and the Nanonis Tramea quantum transport measurement system. Nanonis Tramea users can profit from up to 48 temperature-stabilized 20-bit signal sources able to control even the most complex nanostructures. More information about the new instrument can be found here

New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26

        Privacy Policy

© 2020 by Nanonis Powered by MySign